Cyclades User's Guide Manual De Usuario

Configure Menu Overview

364  

Note: The Save button on every screen saves configuration changes into the 

configuration files. To permanently save the configuration changes, you must 
select Save/Load Conf. from the Configuration Menu.

Enables or disables direct access to KVM ports from the Web 
Manager login screen.

Allows you to assign an alternate TCP Port number or numbers 
for the AlterPath Viewer to use [Default, 5900+]. Use the plus 
sign (+) to increment the port number by 1 for each additional 
AlterPath Viewer. For example: 5903+ means that the first 
AlterPath Viewer uses port 5903 and the second uses port 5904. 
Use the hyphen (-) to indicate a range of addresses, for 
example, 5903-5907. Use the comma (,) to separate two TCP 
port addresses, for example, 5901,5903. Combine commas and 
hyphens, as desired, for example: 1901,5903-5905,5907. 

Note:  Do not use reserved port numbers 1 through 1024. 

Specify the TCP ports or a range of TCP ports to be used for 
RDP (in-band) server connections.

You must have at least eight valid TCP ports specified in order 
to have up to eight simultaneous in-band connections through 
the KVM/net.

For example, if you want ports 3389 to ports 10000 to be used, 
type “3389 - 10000”. If you want to use ports 3389 and higher, 
type “3389+”. If you want to use ports 3389 and below, type 
“3389-”.

You can request valid TCP ports from your network 
administrator.

Table 7-5: General Configuration Screens [OSD] (Continued)