Cyclades User's Guide Manual De Usuario
On Screen Display
367
Configure Menu Overview
Selecting Configure>Network>Network from the OSD Main Menu brings up
the DHCP screen, which is the first in a series of configuration screens that
appear in the sequence shown in the following table.
the DHCP screen, which is the first in a series of configuration screens that
appear in the sequence shown in the following table.
The following table provides a description of all the related configuration
screens.
screens.
Table 7-6: Network Configuration Screens [OSD]
Screen
Description
DHCP
Enable or disable DHCP. When you select “enabled,” the screen
shown in the following figure appears.
shown in the following figure appears.
“active” saves the changes to the configuration files. “active
and save” overwrites the backup configuration files and makes
the changes permanent. Either choice brings you back to the
Network Configuration menu.
and save” overwrites the backup configuration files and makes
the changes permanent. Either choice brings you back to the
Network Configuration menu.
When “disabled” is selected, the IP address, Netmask, Gateway,
DNS Server, Domain, and Hostname forms appear in the
sequence shown in the following rows.
DNS Server, Domain, and Hostname forms appear in the
sequence shown in the following rows.
IP Address
The IP address of the KVM/net.
Netmask
The netmask for the subnet (if applicable) in the form
NNN
NNN
.NNN.NNN.N (for example: 255.255.252.0).