Cyclades User's Guide Manual De Usuario

444  

Execute the following script, replacing the parameters with values 
appropriate for your system. The 

gw

 and 

mask

 parameters are optional. 

b. Using the “vi editor”, edit the file(s) causing the problem and then 

reboot the unit.

c. Check your DNS configuration in the file 

/etc/resolv.conf,

 and 

download the zImage using the 

ftp

 command. See "To Save the 

This procedure assumes that the 

saveconf

 command has been previously run 

to save the configuration. 

While logged in as root through the console, via Telnet, or via any SSH 
session, enter the following command.

[root@(none)]# config_eth0 ip 192.168.51.242 mask 

255.255.255.0 gw 192.168.51.1

[root@(none) root]# saveconf

[root@(none) root]# reboot

[root@KVM/net root]# echo 0>/proc/flash/script

[root@KVM/net root]# reboot