Cyclades User's Guide Manual De Usuario
Introduction
67
KVM Expander
Adding the KVM Expander to the KVM/net Unit’s
List of Cascaded Devices
List of Cascaded Devices
Once the administrator connects the KVM Expander to the primary KVM
unit, the administrator must add the Expander to the primary unit’s list of
cascaded devices. Using the KVM/net Web Manager in Expert Mode, go to:
Configuration>KVM>Devices to see the form displayed in the following
figure.
unit, the administrator must add the Expander to the primary unit’s list of
cascaded devices. Using the KVM/net Web Manager in Expert Mode, go to:
Configuration>KVM>Devices to see the form displayed in the following
figure.
Figure 1-15: Devices Form on KVM/net Web Manager
See “Configuring Cascaded KVM Units” on page 187 for instructions on
adding, deleting, and modifying cascaded devices.
adding, deleting, and modifying cascaded devices.
Upgrading the Microcontroller Code
Once a KVM switch is installed and configured, administrators can use the
Microcode Upgrade form on the primary KVM unit to upgrade the microcode
on a KVM terminator, switch, RP, Port Expander, or video compression
modules. Using the KVM/net Web Manager in Expert Mode, go to:
Management > Microcode Upgrade to see the form displayed in the following
figure.
Microcode Upgrade form on the primary KVM unit to upgrade the microcode
on a KVM terminator, switch, RP, Port Expander, or video compression
modules. Using the KVM/net Web Manager in Expert Mode, go to:
Management > Microcode Upgrade to see the form displayed in the following
figure.