Cyclades User's Guide Manual De Usuario

Setting Up the KVM/net

76  

T

1. Decide whether you need to mount the KVM/net by the front or back and 

locate the appropriate sets of holes on the KVM/net.

Figure 2-1:Rack Mounting Holes on the KVM/net

2. Connect the two supplied brackets to the KVM/net, connecting one bracket 

to each side of the box.

3. For each bracket, insert a screw through each of the three holes on the 

bracket into the appropriate holes at either the front or back of the KVM/net. 

The following figure shows the bracket flanges on the front of the KVM/net after the brackets 
are installed.

4. Use a Phillips screwdriver to tighten the screws.

Bracket

KVM/net side

Holes for front mounting

Holes for back mounting

Brackets