DELL 9.8(0.0) Manual De Usuario
Parameters
peer address
Enter the peer address in a dotted decimal format (A.B.C.D.).
connect-
source
interface
source
interface
Enter the keywords connect-source then one of the
interfaces and slot/port or number information:
interfaces and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
description
name
name
(OPTIONAL) Enter the keyword description then a
description name (maximum 80 characters) to designate a
description for the MSDP peer.
description name (maximum 80 characters) to designate a
description for the MSDP peer.
sa-limit
number
number
(OPTIONAL) Enter the maximum number of SA entries in SA-
cache. The range is from 1 to 100000. .
cache. The range is from 1 to 100000. .
Defaults
As described in the Parameters section.
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.1)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.5.1.0
Added support for 4-port 40G line cards on ExaScale.
7.5.1.0
Added option for SA upper limit and the description
option.
option.
6.2.1.1
Introduced
1184
Multicast Source Discovery Protocol (MSDP)