DELL 9.8(0.0) Manual De Usuario
hop-limit maximum 251
mtu 1350
other-config-flag on
reachable-time 540
retrans-timer 101
router-preference maximum medium
trusted-port
Dell(conf-ra_guard_policy_list)#
Related
Commands
Commands
•
— Allows you to configure the RA guard related
commands.
•
— Defines the RA guard policy name and enter the RA
guard policy list configuration mode.
•
•
— Enables the verification of the advertised hop count limit.
•
— Sets the maximum transmission unit (MTU) value.
•
— Enables the verification of the advertised other
configuration parameter.
•
— Sets the advertised reachability time.
•
— Sets the advertised retransmission time.
•
router preference (DRP) value.
•
— Applies the policy to trusted ports.
show ipv6 nd ra-guard policy
Display the configurations applied on all the RA guard policies or a specific RA guard policy.
Syntax
show ipv6 nd ra-guard policy policy-name
Parameter
policy policy-
name
name
Enter the keyword policy then the policy name. The policy
name allows a maximum of 140 characters.
name allows a maximum of 140 characters.
Command
Modes
Modes
EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.7(0.0)
Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Z9000 switches.
Neighbor Discovery Protocol (NDP)
1237