Raritan Computer 4.7 Manual De Usuario

Chapter 3: Rackmount and Installation 
 

a.  Connect the switch's included power cord from the IEC 320 inlet 

on its rear panel to an appropriate AC outlet. 

b.  Turn on the switch. 

2.  Connect a user station and its attached devices. 

a.  Connect one end of a Cat5 UTP cable to user port # 1 on the 

back of the switch. Connect the other end of the cable to the 
RJ45 Cat5 port on the back of the user station. 

b.  Connect the user station's included power cord from the IEC 320 

inlet on its rear panel to an appropriate AC outlet. 

c.  Turn ON the user station. It will power up and establish 

communication with the Paragon switch. 

d.  Connect a keyboard, a mouse, and a monitor to the user station. 

(To control Sun servers with a PS/2 keyboard, please see 

 (on page 46) 

for additional information.) 

e.  Plug in and turn on the monitor. 

3.  Perform initial configuration of the user station. 

a.  The Login screen should appear on the user station’s attached 

monitor. If the Scroll Lock LED on the user station’s attached 
keyboard is blinking, the Paragon is ready to accept function key 
commands, which allow users to login, select servers, or 
administer the system. 

 

 

If the monitor instead displays a “.....No connection to 
Paragon.....” message, the user station is not properly connected 
to the Paragon switch. Check for loose connections and make 
sure you are using good, intact Cat5 cables. 

b. Type 

admin 

in the User Name field and press Enter. In the 

Password field, type the default password raritan (all 
lowercase) and press Enter.