Q-Logic SANBOX2-64 Manual De Usuario
2 – General Description
Chassis Controls and LEDs
2-4
59043-01 A
2.2
Chassis Controls and LEDs
, is the only
chassis control. Power is applied to the switch logic circuitry when one or both
power supply modules are connected to a 110 or 230 VAC power source. The
chassis LEDs are located on the CPU module and provide status information
about the condition of the switch. The chassis LEDs include the Input Power LED,
Heartbeat LED, Over Temperature LED, and the Fan Fail LED. Refer to
power supply modules are connected to a 110 or 230 VAC power source. The
chassis LEDs are located on the CPU module and provide status information
about the condition of the switch. The chassis LEDs include the Input Power LED,
Heartbeat LED, Over Temperature LED, and the Fan Fail LED. Refer to
for information about power supply LEDs and to
for information about the Port Status LED.
Figure 2-3. Chassis Controls and LEDS
Maintenance
Button
Chassis LEDs
Power
Supply LEDs
Ethernet
Port LEDs