Q-Logic SANBOX2-64 Manual De Usuario
2 – General Description
Fibre Channel Ports
59043-01 A
2-7
2.2.2.3
Fan Fail LED (Amber)
The Fan Fail LED indicates operational status of all fans. This LED illuminates if
the speed of any fan falls below the normal range. Removing a fan will not
illuminate the Fan Fail LED. Refer to
the speed of any fan falls below the normal range. Removing a fan will not
illuminate the Fan Fail LED. Refer to
for
information about troubleshooting fan failure conditions.
2.2.2.4
Over Temperature LED (Amber)
The Over Temperature LED provides status information about the air temperature
inside the switch. This LED illuminates to indicate that the switch logic circuitry is
overheating. Refer to
inside the switch. This LED illuminates to indicate that the switch logic circuitry is
overheating. Refer to
for information about
troubleshooting over temperature conditions.
2.3
Fibre Channel Ports
Each I/O blade has eight Fibre Channel ports that are interconnected with all other
I/O blades through the backplane. Fibre Channel ports are numbered according to
the slot in which the I/O blade resides. Each port is served by a Small Form-Factor
Pluggable (SFP) transceiver. A Port Status LED, located to the left of each port as
shown in
I/O blades through the backplane. Fibre Channel ports are numbered according to
the slot in which the I/O blade resides. Each port is served by a Small Form-Factor
Pluggable (SFP) transceiver. A Port Status LED, located to the left of each port as
shown in
, provides port login and activity status information. Port
modes configure the ports to communicate with public devices, private devices,
and other switches.
and other switches.
Figure 2-5. Fibre Channel Ports
Port
Port Status
LED