Q-Logic 5600 Manual De Usuario

5 – Managing Ports

Configuring Ports

5-14

59097-02 B

S

The I/O Stream Guard feature suppresses the Registered State Change 
Notification (RSCN) messages on a port basis. I/O Stream Guard should be 
enabled only on ports connected to initiator devices. To configure the I/O Stream 
Guard option using the Port Properties dialog, open the Port menu, and select 
Port Properties. Click the radio button that corresponds to one of the following 
options:
„

Enable: Suppresses the reception of RSCN messages from other ports for 
which I/O Stream Guard is enabled.

„

Disable: Allows free transmission and reception of RSCN messages.

„

Auto: Suppresses the reception of RSCN messages when the port is 
connected to an initiator device with a QLogic HBA. For older QLogic HBAs, 
such as the QLA2200, Device Scan must be enabled. The default is Auto. 
Refer to 

The Device Scan feature queries the connected device during login for FC-4 
descriptor information. Disable this parameter only if the scan creates a conflict 
with the connected device.

To change the symbolic name of a port from the faceplate display, do the 
following:

1.

Open the faceplate display and select a port.

2.

Open the Port menu and select Port Symbolic Name. 

3.

In the Port Symbolic Name dialog, choose one of the following: 
„

Enter a new name for the port in the Set Port Symbolic Name field. The 
symbolic name can have up to 32 characters.

„

Check the Restore Default Port Symbolic Name check box to restore 
the default name.

4.

Click the OK button.