Q-Logic 8C/16 Manual De Usuario

B – Graphing Port Performance

Printing Graphs

59022-06 A

B-7

Q

To modify the graph options, do the following:

1.

Choose the units for the graph:
„

Select the Show Bytes Data on Graph check box to plot data in 
KBytes/second

„

Select the Show Frames Data on Graph check box to plot data in 
frames/second.

2.

Choose what data type to plot. For example, if you selected Show Frames 
Data on Graph in 

, you can plot one or all of the following:

„

Total frames transmitted and received (Total Frames)

„

Total frames transmitted (Total Tx Frames)

„

Total frames received (Total Rx Frames)

In addition to these, you can also plot total errors by selecting the Total 
Errors check box.

3.

Display or hide the unit grid. Select the Display Grid on Graph check box to 
display the unit grid.

4.

Choose the color scheme for the graph. You can select the color for each 
data type, the unit grid, and the background by clicking the corresponding 
color field or button. In each case, you can choose a color using the 
swatches, Red-Green-Blue (RGB), or Hue-Saturation-Brightness (HSB) 
method.
„

Swatches – Click the Swatches tab. Select a swatch from the palette.

„

HSB – Click the HSB tab. Select a color using any of the following 
methods:
‰

Click in the color palette.

‰

Select the H, S, or B button and use the slide to vary the selected 
value.

‰

Enter values in the H, S, or B input fields.

„

RGB – Click the RGB tab. Select a color by moving the slides to adjust 
the values for red, blue, and green; or enter values in the input fields.

5.

Specify the scope for which the changes are to apply. Choose the 
corresponding radio button to apply changes to all graphs, selected graphs, 
or new graphs.

6.

Choose the OK button.

To print a graph, select a graph, then open the File menu and select Print Graph 
Window. You can also right click on a graph and select Print Graph Window 
from the popup menu.