Nortel Networks 1000ASE-XD Manual De Usuario

Chapter 3 Using the console interface

209418-A

The following requirements apply to the Configuration File feature:

•

The Configuration File feature can only be used to copy standalone switch 
configuration parameters to other standalone switches or to copy stack 
configuration parameters to other stack configurations.

For example, you cannot duplicate the configuration parameters of a unit in a 
stack configuration and use it to configure a standalone switch.

•

A configuration file obtained from a standalone switch can only be used to 
configure other standalone switches that have the same firmware revision and 
model type as the donor standalone switch.

•

A configuration file obtained from a stack unit can only be used to configure 
other stacks that have the same number of switches, firmware version, model 
types, and physical IDs as the stack the donor stack unit resides in.

Reconfigured stacks are configured according to the unit order number of the 
donor unit. For example, the configuration file parameters from a donor unit 
with physical ID x are used to reconfigure the unit with physical ID x.

 describes configuration file parameter information.

Table 41   Parameters not saved to the configuration file

In-Band Stack IP Address

IP Configuration/Setup

 

In-Band Switch IP Address

In-Band Subnet Mask

Default Gateway

Console Read-Only Switch Password

Console/Comm Port Configuration

Console Read-Write Switch Password

Console Read-Only Stack Password

Console Read-Write Stack Password

Configuration Image Filename

Configuration File Download/Upload

TFTP Server IP Address