Nortel Networks 2000 Manual De Usuario
120 Chapter 2 Network configuration
208700-B
Figure 33 VLAN Port Configuration screen example
VLAN workgroup summary
This section summarizes the VLAN workgroup examples discussed in the
previous sections of this chapter.
previous sections of this chapter.
As shown in
, Switch S1 (Business Policy Switch) is configured with
multiple VLANs:
•
Ports 1, 6, 11, and 12 are in VLAN 1.
•
Ports 2, 3, 4, 7, and 10 are in VLAN 2.
•
Port 8 is in VLAN 3.
Because S4 does not support 802.1Q tagging, a single switch port on each switch
must be used for each VLAN (see
must be used for each VLAN (see
The connection to S2 requires only one link between the switches because S1 and
S2 are both Business Policy Switches that support 802.1Q tagging (see
S2 are both Business Policy Switches that support 802.1Q tagging (see
VLAN Port Configuration
Unit: [ 1 ]
Port: [ 8 ]
Filter Tagged Frames: [ No ]
Filter Untagged Frames: [ No ]
Filter Unregistered Frames: [ No ]
Port Name: [ Student port ]
PVID: [ 3 ]
Port Priority: [ 0 ]
Tagging: [Untagged Access]
Port: [ 8 ]
Filter Tagged Frames: [ No ]
Filter Untagged Frames: [ No ]
Filter Unregistered Frames: [ No ]
Port Name: [ Student port ]
PVID: [ 3 ]
Port Priority: [ 0 ]
Tagging: [Untagged Access]
AutoPVID (all ports): [ Disabled ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.