Nortel Networks 2000 Manual De Usuario
Chapter 3 Using the console interface 207
Using the Business Policy Switch 2000 Version 1.2
In this mode, the Gigabit MDA port is disabled from transmitting pause frames to
its link partner. Use this mode when the Gigabit MDA port is connected to a
buffered repeater device.
its link partner. Use this mode when the Gigabit MDA port is connected to a
buffered repeater device.
MultiLink Trunk Configuration Menu screen
The MultiLink Trunk Configuration Menu screen (
) allows you to select
the appropriate screen to configure up to six MultiLink Trunks (you can group up
to four switch ports together to form each trunk).
to four switch ports together to form each trunk).
You can configure up to six MultiLink Trunks in each stack, with trunk members
in either a single unit or distributed between units within the stack configuration
(distributed trunking).
in either a single unit or distributed between units within the stack configuration
(distributed trunking).
You can monitor the bandwidth usage for the trunk member ports within each
trunk. For more information about configuring MultiLink Trunks, see Chapters 1
and 2.
trunk. For more information about configuring MultiLink Trunks, see Chapters 1
and 2.
To open the MultiLink Trunk Configuration Menu screen:
➨
Choose MultiLink Trunk Configuration (or press t) from the Switch
Configuration Menu screen.
Configuration Menu screen.
Note:
When a trunk is not active (Trunk Status field set to Disabled),
configuration changes do not take effect until you set the Trunk Status
field to Enabled.
field to Enabled.