Nortel Networks 2000 Manual De Usuario

Chapter 3 Using the console interface 211

Using the Business Policy Switch 2000 Version 1.2

MultiLink Trunk Utilization screen

The MultiLink Trunk Utilization screen (

Figure 76

and

Figure 77

) allows you to

monitor the percentage of bandwidth used by configured trunk members. You can
choose the type of traffic to monitor.

Figure 76

shows an example of bandwidth utilization rates for trunk member

ports. Because two screens are necessary to show all of the configured trunks (up
to six), the screen prompts you to Press [Ctrl]-N to view trunks five and six.

➨

Choose MultiLink Trunk Utilization (or press u) from the MultiLink Trunk
Configuration Menu screen to open the MultiLink Trunk Utilization screen.

Figure 76 MultiLink Trunk Utilization screen (1 of 2)

MultiLink Trunk Utilization

Trunk Traffic Type Unit/Port Last 5 Minutes Last 30 Minutes Last Hour
----- ------------- --------- -------------- --------------- ---------
1 [ Rx and Tx ] 3/6 90.0% 70.0% 90.0%
   3/7 20.0% 55.0% 80.0%
   3/9 35.0% 45.0% 45.0%
   3/17 85.0% 35.0% 20.0%
2 [ Rx and Tx ] 4/25 45.0% 45.0% 50.0%
   4/26 25.0% 70.0% 35.0%

3 [ Rx and Tx ] 6/13 35.0% 35.0% 50.0%
6/14 30.0% 80.0% 70.0%

4 [ Rx and Tx ] 5/19 40.0% 35.0% 75.0%
5/20 25.0% 70.0% 85 0%

More...
Press Ctrl-N to display utilization for trunks 5-6.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.