Nortel Networks 2000 Manual De Usuario
Chapter 3 Using the console interface 245
Using the Business Policy Switch 2000 Version 1.2
Spanning Tree Port Configuration screen
The Spanning Tree Port Configuration screen allows you to set the STG
participation for each switch port or all ports and to display spanning tree settings
for individual switch ports or all switch ports.
participation for each switch port or all ports and to display spanning tree settings
for individual switch ports or all switch ports.
shows sample port displays for the two Spanning Tree Port
Configuration screens.
➨
Choose Spanning Tree Port Configuration (or press c) from the Spanning Tree
Configuration Menu to open the Spanning Tree Port Configuration screen.
Configuration Menu to open the Spanning Tree Port Configuration screen.
Delete VLAN
Membership
Membership
Allows you to delete a VLAN from the specified spanning tree group.
Default Value
Blank
Range
1 to 4094; but only configured ones are available
NOTE: You cannot remove VLAN 1 from STP Group 1.
Tagged BPDU
on tagged port
on tagged port
Allows you to choose to send either tagged or untagged BPDUs from a tagged port.
Default Value
STP Group 1: No; Other STP Groups: Yes
Range
No or Yes
STP Group
State
State
Allows you to make the STP Group active or inactive.
Note that you cannot set the default STG, STG1, to InActive.
Default Value
Active for STG1; InActive for STGs 2 to 8.
Range
Active or InActive
Note:
If spanning tree participation of any trunk member is changed
(enabled or disabled), the spanning tree participation of all members of
that trunk is changed similarly.
that trunk is changed similarly.
Table 45 Spanning Tree Group Configuration parameters (continued)
Parameter
Description