Nortel Networks 2000 Manual De Usuario

Using the Business Policy Switch 2000 Version 1.2

 

All configuration parameters are stored in flash memory. These parameters are 
updated every 10 seconds (if a change occurs) or whenever a reset command is 
executed.

The MultiLink Trunking feature allows you to group multiple ports, two to four 
together, when forming a link to another switch or server, thus increasing 
aggregate throughput of the interconnection between two devices, up to 800 Mb/s 
in full-duplex mode. The Business Policy Switch can be configured with up to six 
MultiLink Trunks. The trunk members can be configured within a single unit in 
the stack or distributed between any of the units within the stack configuration 
(distributed trunking).

For more information about the MultiLink Trunking feature, refer to 

.”

Do not power off the switch within 10 seconds of changing any 

configuration parameters. Powering down the switch within 10 seconds 
of changing configuration parameters can cause the changed 
configuration parameters to be lost.

For information on configuring VLANs, STGs, and MLTs, refer 

to