Nortel Networks 4500 Manual De Usuario
Chapter 3 Contivity 2500/2000/4000 Option Installation 49
Installing Hardware Options for the Contivity VPN Switch
To install an option card:
1
Turn off the switch and remove the power cord.
2
Remove the front bezel and top cover as shown in
3
Remove the filler panel screw and pull out the filler panel as shown in
.
4
Slide the option card into the intended slot. Make sure the card seats firmly
and evenly in the card slot. If the card is not seated properly, it will not work.
and evenly in the card slot. If the card is not seated properly, it will not work.
5
Replace the card and screw.
6
Replace the and top cover and front bezel.
7
Turn the switch on.
Installing Contivity 2500/2000/4000 DIMMs
shows you how to unlock a Dual Inline Memory Module (DIMM) in a
Contivity 2500/2000/4000, and remove or install a DIMM. Install a DIMM in the
next available slot (for example, if the DIMM #1 slot is populated, add the next
DIMM to the DIMM #2 slot).
next available slot (for example, if the DIMM #1 slot is populated, add the next
DIMM to the DIMM #2 slot).