3com 5500-SI Manual De Usuario

Descargar
Página de 686
106 
C
HAPTER
 6: VLAN O
PERATION
Displaying and
Debugging of Voice
VLAN
 
After completing the above configuration, enter the 
display
 command in any view 
to view the configuration and running state of Voice VLAN. 
Voice VLAN
Configuration Example
Networking Requirements
Create VLAN 2 as the Voice VLAN in manual mode and enable its security mode. It is 
required to set the aging time to 100 minutes, the OUI address to 0011-2200-0000, 
and configure the port Ethernet1/0/2 as the IP Phone access port. The type of IP 
Phone is untagged.
Network Diagram
Figure 25   Voice VLAN Configuration
Configuration Steps 
[SW5500]vlan 2
[SW5500-vlan2]port ethernet1/0/2
[SW5500-vlan2]interface ethernet1/0/2
[SW5500-Ethernet1/0/2]voice vlan enable
[SW5500 -Ethernet1/0/2]quit
[SW5500]undo voice vlan mode auto
[SW5500]voice vlan mac_address 0011-2200-0000 mask ffff-ff00-0000 
description private
[SW5500]voice vlan 2 enable
[SW5500]voice vlan aging 100
Table 97   Displaying Voice VLAN
Operation
Command
Display the status of Voice VLAN 
display voice vlan status
Display the OUI address supported by the current system  display voice vlan oui