3com 5500-SI Manual De Usuario

C

HAPTER

 19: ACL C

ONFIGURATION

Table 367   Activate ACL

After the above configuration, execute 

 command in all views to display the 

running of the ACL configuration, and to verify the effect of the configuration.

 

Execute 

 command in User View to clear the statistics of the ACL module.

Table 368   Display and Debug ACL

The matched information of 

command specifies the rules treated by 

the Switch’s CPU. 

For syntax description, refer to the Command Reference Manual. 

The interconnection between different departments on a company network is 
implemented through the 1000 Mbps ports of the Switch. The IP address of the 
payment query server of the Financial Dept. is 129.110.1.2. Financial Dept is accessed 
using GigabitEthernet1/0/50. It is required to properly configure the ACL and limit 
Financial Dept access to the payment query server between 8:00 and 18:00. 

Figure 88   Access Control Configuration Example

Activate an ACL

 [ rule rule ] | ip-group acl_number [ rule rule 

 acl_number  rule rule ] ] | link-group 

 [ rule rule ] }

Deactivate an ACL undo packet-filter { inbound | outbound } { user-group 

 [ rule rule ] | ip-group acl_number [ rule rule 

acl_number  rule

 rule ] ] | link-group 

 [ rule rule ] }

Display the status of the time range

 }

Display the detail information about the 
ACL

 } 

Display the information about the ACL 
running state

display packet-filter { interface { 
interface_name

 | interface_type 

interface_num } | unitid unit_id }

Clear ACL counters

acl_number }

Administration Department

subnet address

10.120.0.0

Financial Department

subnet address

10.110.0.0

Office of President

129.111.1.2

Pay query server

129.110.1.2

Switch

#1

#4

#3

#2

Connected to a router