3com 5500-SI Manual De Usuario

C

HAPTER

 22: F

ILE

 S

YSTEM

 M

ANAGEMENT

Password:*****                                                             

230 Logged in successfully      

[ftp]

3 Type in the authorized directory of the FTP server. 

[ftp]cd switch

4 Use the 

 command to upload the config.cfg to the FTP server. 

[ftp]put config.cfg

5 Use the 

 command to download the switch.app from the FTP server to the flash 

directory on the FTP server. 

[ftp]get switch.app

6 Use the 

 command to release FTP connection and return to User View. 

[ftp]quit

<SW5500>

7 Use the 

 command to specify the downloaded program as the 

application at the next login and reboot the Switch. 

<SW5500> boot boot-loader switch.app

<SW5500> reboot

The Switch serves as FTP server and the remote PC as FTP client. The configuration on 
FTP server: Configure a FTP user named as Switch, with password hello and with read 
and write authority over the flash root directory on the PC. The IP address of a VLAN 
interface on the Switch is 1.1.1.1, and that of the PC is 2.2.2.2. The Switch and PC 
are reachable. 

The Switch application 

 is stored on the PC. Using FTP, the PC can upload 

the 

 from the remote FTP server and download the 

 from the 

FTP server for backup purpose. 

Networking for FTP Configuration

1 Configure the Switch

Log into the Switch (locally through the Console port or remotely using Telnet).

<SW5500>

2 Start FTP function and set username, password and file directory.

[SW5500]ftp server enable

[SW5500]local-user switch

[SW5500-luser-switch]service-type ftp ftp-directory flash: 

[SW5500-luser-switch]password simple hello

Switch

PC

Network

Switch

Switch

PC

Network