3com 5500-SI Manual De Usuario

Terminating the FTP Connection of a Specified User 461

By using the following command, the network administrator can forcibly terminate 
the FTP connection of a specified user on the FTP server, in order to secure the 
operation of the network.

You can use the following command in user view to restart your switch when your 
switch is in trouble or needs to be restarted.The system will check whether there is 
any configuration change before it restarts, and will ask whether you want to 
proceed or not if there is any change, to prevent you from losing your original 
configuration due to forgetting after the restart.

The 

 commands can be classified as follows according to their functions.

■

Commands for displaying the system configuration information

■

Commands for displaying the system running state

■

Commands for displaying the system statistics information 

For the 

 commands related to each protocol and different ports, refer to the 

relevant chapters. The following 

 commands are used for displaying the 

system state and the statistics information. 

Configuration agent is one of the XRN features. You can log into one Switch of the 
Fabric to configure and manage the Fabric. The functions of the configuration agent 
include:

■

Distributing configuration commands to the right destination Switches or 
processing modules based on the resolution result of the commands input. 

■

Sending output information of the commands from the Switch you have logged 
into to your terminal.

■

Supporting simultaneous configuration of multiple users.

You cannot configure the configuration agent, but can view the statistics of the 
configuration agent. 

Perform the following operations in all views. 

Table 512   Terminate the FTP connection of a specified user

Enter system view

system-view

—

Terminate the FTP connection of a specified 
user on the FTP server

ftp disconnect 
user-name

Required

Table 513   Restart the switch

Restart the switch

reboot [ unit unit-id ]

—

Table 514   The Display Commands of the System

Display the system clock

Display the system version

Display the saved-configuration