3com 5500-SI Manual De Usuario
Remote-ping Configuration 467
The remote-ping test does not display test results. You can use the display
remote-ping command to view the test results.
remote-ping command to view the test results.
You can use the display remote-ping command to check the test history as well as the
latest test results.
latest test results.
Configuration Example
Network Requirement
Perform an remote-ping ICMP test between two switches. Like a ping test, this test
uses ICMP to test the RTTs of data packets between the source and the destination.
uses ICMP to test the RTTs of data packets between the source and the destination.
Configuration procedure
1 Enable remote-ping Client.
[S5500] remote-ping-agent enable
2 Create an remote-ping test group administrator icmp.
[S5500] remote-ping administrator icmp
3 Configure the test parameters.
[S5500-remote-ping-administrator-icmp] test-type icmp
[S5500-remote-ping-administrator-icmp] destination-ip 10.10.10.10
[S5500-remote-ping-administrator-icmp] count 10
[S5500-remote-ping-administrator-icmp] timeout 3
4 Enable the test operation.
[S5500-remote-ping-administrator-icmp] test-enable
Configure the test
parameters
parameters
Configure
the
destination IP
address of
the test
the
destination IP
address of
the test
destination-ip ip-address
Required
By default, no destination IP
address is configured.
By default, no destination IP
address is configured.
Configure
the type of
the test.
the type of
the test.
test-type type
Optional
By default, the test type is
ICMP.
By default, the test type is
ICMP.
Configure
the packet
sending
times in each
test.
the packet
sending
times in each
test.
count times
Optional
By default, the packet sending
times in each test is 1.
By default, the packet sending
times in each test is 1.
Configure
the
automatic
test interval.
the
automatic
test interval.
frequency interval
Optional
By default, the automatic test
interval is zero, which
indicating the test will be
performed only once.
By default, the automatic test
interval is zero, which
indicating the test will be
performed only once.
Configure
the timeout
time of the
test.
the timeout
time of the
test.
timeout time
Optional
By default, the timeout time is
3 seconds.
By default, the timeout time is
3 seconds.
Execute the test
test-enable
Required
Display test results
display remote-ping { history
| results } [
administrator-name test-tag ]
| results } [
administrator-name test-tag ]
Required
You can execute the command
in any view.
You can execute the command
in any view.
Table 519 Configure Remote-ping (continued)
Operation
Command
Description