3com 5500-SI Manual De Usuario

C

HAPTER

 27: P

O

E P

ROFILE

 C

ONFIGURATION

■

The display current-configuration command can be used to indicate that the 
PoE Profile is being used properly, so long as one PoE feature in the PoE Profile is in 
proper use for a given port.

■

If one or more features of the PoE Profile are not used properly for a given port, 
the terminal will show clearly which feature on what port is not used properly.

■

PoE Profile configuration is a global configuration, and applies synchronously in 
the XRN system.

■

Combination of Unit creates a new Fabric. In the newly created Fabric, the PoE 
Profile configuration of the Unit with the smallest Unit ID number will become the 
PoE Profile configuration for the Fabric currently in use.

■

Split of Fabric results in many new Fabrics. In each newly created Fabric, the PoE 
Profile configuration of each Unit remains the same as it was before the split.

Ethernent1/0/1 through thernet1/0/10 ports of the Switch 5500 are classified as type 
A group users, who have the following requirements:

■

All ports in use can enable PoE function;

■

Use data cable to supply power;

■

The PoE priority for Ethernet1/0/1 through Ethernet1/0/5 ports is Critical, whereas 
The PoE priority for Ethernet1/0/6 through Ethernet1/0/10 is High.

■

The maximum power for Ethernet1/0/1 through Ethernet1/0/5 ports is 3000mW, 
whereas the maximum power for Ethernet1/0/6 through Ethernet1/0/10 is 
15,400mW.

Based on the above requirements, two PoE Profiles are made for type A group users.

■

Use PoE Profile1 for Ethernet1/0/1 through Ethernet1/0/5 ports;

■

Use PoE Profile2 for Ethernet1/0/6 through Ethernet1/0/10 ports.

Display detailed configuration 
information on the existing PoE 
Profile 

display poe-profile { all-profile | 
interface interface-type 
interface-number | name 
profilename }

You can use the display 
command under any 
view.

Table 615   PoE Profile Configuration (continued)