3com 5500-SI Manual De Usuario

C

HAPTER

 28: SNMP C

ONFIGURATION

Table 623   Set/Delete an SNMP Group

You can use the following commands to set or remove the source address of the trap. 

Perform the following configuration in System View.

Table 624   Set the Source Address of Trap

You can use the following commands to add or delete a user to/from an SNMP group.

Perform the following configuration in System View.

Table 625   Add/Delete a user to/from an SNMP Group

You can use the following commands to create, update the information of views or 
delete a view.

Perform the following configuration in System View.

Table 626   Create/Update View Information or Deleting a View

 

You can use the following commands to set the size of SNMP packet sent/received by 
an agent.

Perform the following configuration in System View.

Setting an SNMP group 

 group-name [ 

 ] [ write-view write-view ] [ 

 ] [ acl acl-list ] 

 [ authentication | 

 ] [ write-view 

 ] [notify-view notify-view ] [ acl 

 ]

Deleting an SNMP group 

 group-name 

group-name [ 

Set the source address of trap

Remove the source address of trap

Add a user to an SNMP 
group.

 username groupname [ 

 acl-list ] snmp-agent usm-user v3 username 

 [ authentication-mode { md5 | sha } 

 [ privacy-mode { des56 privpassstring 

 acl-list ]

Delete a user from an 
SNMP group.

 username 

 undo snmp-agent usm-user v3 username 

 { local | engineid engine-id }

Create/Update view information

snmp-agent mib-view { included | excluded } 
view-name oid-tree

Delete a view

 view-name