3com 5500-SI Manual De Usuario
Configuring HWTACACS 617
Configuring HWTACACS
Authentication Servers
Perform the following configuration in HWTACACS view.
The primary and secondary authentication servers cannot use the same IP address.
The default port number is 49.
The default port number is 49.
If you execute this command repeatedly, the new settings will replace the old settings.
The authentication server can be deleted only when there is no active TCP connection
used for sending authentication packets.
used for sending authentication packets.
Configuring HWTACACS
Accounting Servers and
the Related Attributes
Configuring HWTACACS accounting servers
Perform the following configuration in HWTACACS view.
The primary and secondary accounting servers cannot use the same IP address. The
default port number is 49.
default port number is 49.
If you execute this command repeatedly, the new settings will replace the old settings.
Enabling stop-accounting packet retransmission
Perform the following configuration in the corresponding view.
By default, stop-accounting packet retransmission is enabled, and the maximum
number of transmission attempts is 100.
number of transmission attempts is 100.
Table 673 Configuring HWTACACS authentication servers
Operation
Command
Configure the HWTACACS primary
authentication server.
authentication server.
primary authentication ip-address [ port ]
Delete the HWTACACS primary authentication
server.
server.
undo primary authentication
Configure the HWTACACS secondary
authentication server.
authentication server.
secondary authentication ip-address [ port ]
Delete the HWTACACS secondary
authentication server.
authentication server.
undo secondary authentication
Table 674 Configuring HWTACACS accounting servers
Operation
Command
Configure the primary TACACS accounting
server.
server.
primary accounting ip-address [ port ]
Delete the primary TACACS accounting server.
undo primary accounting
Configure the secondary TACACS accounting
server.
server.
secondary accounting ip-address [ port ]
Delete the secondary TACACS accounting
server.
server.
undo secondary accounting
Table 675 Configuring stop-accounting packet retransmission
Operation
Command
Enable stop-accounting packet retransmission
and set the allowed maximum number of
transmission attempts (HWTACACS view)
and set the allowed maximum number of
transmission attempts (HWTACACS view)
retry stop-accounting retry-times
Disable stop-accounting packet retransmission
(HWTACACS view)
(HWTACACS view)
undo retry stop-accounting
Clear the stop-accounting request packets that
have no response (User view)
have no response (User view)
reset stop-accounting-buffer
hwtacacs-scheme hwtacacs-scheme-name
hwtacacs-scheme hwtacacs-scheme-name