3com CM 4000 Manual De Usuario

2

3

4

5

7

8

9

0

6

1

VTR

CAM

SAT

VCR

NET

REM

TEST

PTCH

CGEN

Stu

MISC

AUX

EJ

FILM

FS

STILL

Take

Clear

Menu

CP 3808

PRESET

STUDIO−A

Press once to show current destination in Preset window.

VTR−01−V

VTR−01−L

VTR−01−R

VTR−01−T

To select a destination:

1.

Press the MENU button once.

The Preset window will display the present destination.

Note:  If the MENU button does not blink, the destination cannot be changed—probably because the panel has
been limited to a certain output by the CP Output set used on the MPK Devices table. See page 5−112.

2.

Select a new destination by

— pressing a category (e.g., “VTR”) and unit number combination, or by

— using the UP and DOWN arrows to scroll through all available destinations, or by

— pressing a category key and using UP/DOWN to scroll through the available units in that category; or by

— selecting a destination on the CP 3809 Expansion Panel (if so equipped—see Figure 6−104).

If the output has been locked* by another panel, the TAKE button will blink red. To continue, the output must be un-
locked (by the panel used to set the lock).

For additional protect/lock information − see page 6−12.

3.

When the desired destination is displayed in the Preset window, press the TAKE button to select it.

To verify the new output, press MENU again. To return to Home mode, press CLEAR.