3com 7000 Manual De Usuario

 

 

 

 

 

This product complies with the electro-magnetic compatibility (EMC) 

 

requirements of EN 55022 Class A and EN 50082 (susceptibility) as long 

 

as the following prerequisites are observed:

■

 

The WAN port must be attached to a screened digital cable.

■

 

The ISDN cable must be used in conjunction with a three turn ferrite.

 

The product carries the 

 

 certification mark to indicate conformance 

 

with the following EU directives:

■

 

LVD (Low Voltage Directive (Safety) 73/23/EEC.

■

 

EMC (Electro Magnetic Compatibility) Directive 89/336/EEC.

■

 

TTE (Telecommunication Terminal Equipment) Directive 91/263/EEC.

 

The PRI Bridge/Router Module conforms to BS6450 part4, BS7378 

 

part1 and I-CTR4 (Primary Rate ISDN).

 

The BRI Bridge/Router Module conforms to I-CTR3 (based on NET3 – 

 

ISDN interface).

 

S

 

ee also the FCC and CSA statements at the back of this guide.

 

 

 

16V ac, 47 to 63 Hz, 1A max. Typical power consumption 11 Watts.

 

 

Temperature 0 to 40 degrees centigrade operating. -50 to 70 degrees 

 

centigrade storage.

 

Relative humidity 5% to 95% non-condensing.

 

Altitude to 3000 

 

meters.