3com DUA1750-2BAA01 Manual De Usuario

3Com Switch 8800 Configuration Guide 

Chapter 36  MPLS Basic Capability Configuration

 

36-1 

Basic MPLS forwarding functions includes LDP session establishment and LSP path 

maintenance. 

The typical configuration procedure for enabling basic MPLS functions on a routing 

switch is as follows: 

1) 

Configure LSR ID 

2) Enable 

MPLS 

3) Enable 

LDP 

4) 

Enter VLAN interface view and enable MPLS and LDP on the interface 

Then the routing switch can provide MPLS forwarding and LDP signaling functions. 

If you want to modify the default parameters or enable some special functions, for 

example, manually creating LSP or explicit route, you can configure according to the 

methods in configuration list. For some complicated functions, configuration 

combination may be required. 

The following sections describe the required configuration tasks for MPLS basic 

capability: 

z 

z 

The following sections describe the optional configuration tasks for MPLS basic 

capability: 

z 

z 

Before configuring any other MPLS command, it is necessary to configure LSR ID firstly. 

This ID is usually in IP address format and must be unique in the domain. 

Perform the following configuration in the system view.