3com DUA1750-2BAA01 Manual De Usuario

3Com Switch 8800 Configuration Guide 

Chapter 39  802.1x Configuration

 

39-11 

-timeout-value: Specifies how long the duration of an authentication timeout timer 

of a Supplicant is. The value ranges from 10 to 120 in units of second and defaults to 
30. 

: Specifies the transmission timeout timer. After the Authenticator sends the 

Request/Identity request packet which requests the user name or user name and 
password together, the tx-period timer of the Authenticator begins to run. If the 
Supplicant does not respond back with authentication reply packet successfully, then 
the Authenticator will resend the authentication request packet. 

-period-value: Specifies how long the duration of the transmission timeout timer is. 

The value ranges from 10 to 120 in units of second and defaults to 30. 

You can use the following commands to enable/disable a quiet-period timer of an 
Authenticator (such as a Switch 8800). If an 802.1x user has not passed the 
authentication, the Authenticator will keep quiet for a while (which is specified by dot1x 

command) before launching the authentication again. During the 

quiet period, the Authenticator does not do anything related to 802.1x authentication. 

Perform the following configuration in system view. 

Enable/Disable a quiet-period timer 

Enable a quiet-period timer 

 

Disable a quiet-period timer 

 

 

By default, quiet-period timer is disabled. 

After the above configuration, execute display dot1x command in any view to display 
the running of the 802.1x configuration, and to verify the effect of the configuration. 
Execute  reset dot1x statistics command in user view to reset 802.1x statistics. 
Execute debugging command in user view to debug 802.1x. 

Display and debug 802.1x 

Display the configuration, running and 
statistics information of 802.1x 

 [ sessions | statistics  | 

] [ interface 

-list ] 

Reset the 802.1x statistics information 

[ interface 

-list ]