3com DUA1750-2BAA01 Manual De Usuario

3Com Switch 8800 Configuration Guide 

Chapter 41  VRRP Configuration

 

41-9 

After the above configuration, execute display command in any view to display the 

running of the VRRP configuration, and to verify the configuration. Execute debugging 

command in user view to debug VRRP configuration. 

Table 41-10 Display and debug VRRP 

Display VRRP state information 

display vrrp [ interface vlan-interface 
interface-num [ virtual-router-ID ] ]  

Display VRRP statistics information 

display vrrp statistics [ vlan-interface 
interface-num [ virtual-router-ID ] 

Display VRRP summary information 

Clear the statistics information about 
VRRP 

reset vrrp  statistics  [ vlan-interface 
interface-num [ virtual-router-ID ] ] 

Enable VRRP debugging. 

debugging vrrp { state  | packet  | 
error } 

Disable VRRP debugging. 

undo debugging vrrp { state | packet | 
error } 

 

You can enable VRRP debugging to check its running. You may choose to enable 

VRRP packet debugging (option as packet), VRRP state debugging (option as state), 

and/or VRRP error debugging (option as error). By default, VRRP debugging is 

disabled.  

Host A uses the VRRP virtual router which combines switch A and switch B as its 

default gateway to access host B on the Internet. 

VRRP virtual router information includes: virtual router ID1, virtual IP address 

202.38.160.111, switch A as the Master and switch B as the Backup allowed 

preemption.