3com DUA1750-2BAA01 Manual De Usuario

3Com Switch 8800 Configuration Guide 

Chapter 43  File System Management

 

43-6 

The  reset saved-configuration command can be used to erase configuration files 

from Flash Memory. The system will use the default configuration parameters for 

initialization when the Ethernet switch is powered on for the next time. 

Perform the following configuration in user view. 

Table 43-7 Erase configuration files from Flash Memory 

Erase configuration files from Flash Memory 

reset saved-configuration 

 

You may erase the configuration files from the Flash in the following cases: 

z 

After being upgraded, the software does not match with the configuration files. 

z 

The configuration files in flash are damaged. (A common case is that a wrong 

configuration file has been downloaded.) 

Perform the following configuration in user view. 

Table 43-8 Configure the name of the configuration file used for the next startup 

Configure the name of the configuration 
file used for the next startup 

startup saved-configuration cfgfile 

 

cfgfile is the name of the configuration file and its extension name can be “.cfg”. The file 

is stored in the root directory of the storage devices. 

After the above configuration, execute display command in any view to display the 

running of the configuration files, and to verify the effect of the configuration.  

Table 43-9 Display the information of the file used at startup 

Display the information of the file used at startup

display startup