3com DUA1750-2BAA01 Manual De Usuario

3Com Switch 8800 Configuration Guide 

Chapter 46  System Maintenance and Debugging

 

46-5 

The ping  command can be used to check the network connection and if the host is 

reachable.  

Perform the following configuration in any view.  

Table 46-8 The ping command 

Support IP ping 

ping  [  ip ] [ -a  ip-address | -c  count | -d | -h  ttl | -i 
{interface-type  interface-num | interface-name } | -n | - p 
pattern | -q | -r | -s  packetsize | -t  timeout | -tos  tos | -v | 
-vpn-instance vpn-instance-name ]* host 

 

The output of the command includes: 

z 

The response to each ping message. If no response packet is received when time 

is out, ”Request time out” information appears. Otherwise, the data bytes, the 

packet sequence number, TTL, and the round-trip time of the response packet will 

be displayed. 

z 

The final statistics, including the number of the packets the switch sent out and 

received, the packet loss ratio, the round-trip time in its minimum value, mean 

value and maximum value.  

Use the ping-distribute enable command to enable the ping distribution function.  

Use the undo ping-distribute enable command to disable the ping distribution 

function. 

Perform the following configuration in system view.  

Table 46-9 Enable/disable the ping distribution function 

Enable the ping distribution function 

Disable the ping distribution function 

 

By default, the ping distribution function is enabled.