3com 9000 SX Manual De Usuario

Options for the ping command are described in Table 3-6.

The traceroute command allows you to trace the routed path between 
the Switch and a destination endstation.

The traceroute command syntax is as follows:

traceroute <ip_address>

where ip_address is the IP address of the destination endstation.

Ports on the Switch 9000 can be configured in the following ways:

■

Enabling and disabling individual ports

■

Configuring autonegotiation

■

Creating load-sharing groups on multiple ports

By default, all ports are enabled. To enable or disable one or more 
ports, use the following command:

[enable | disable] port <portlist>

For example, to disable ports 3, 5, and 6, enter the following:

Even though a port is disabled, the link remains enabled for diagnostic 
purposes.

By default, the Switch 9000 is configured to use autonegotiation. You 
can automatically turn autonegotiation on and off. 

To turn off autonegotiation, use the following command:

Table 3-6   Ping Command Parameters

continuous

Allows you to specify ICMP echo messages to be sent 
continuously.

size <n>

Allows you to specify the size of the packet.

SW9000.BK  Page 13  Wednesday, April 1, 1998  11:00 AM