3com 3CBLSF26H Manual De Usuario

 

3-82 

TFTP Server IP Address 

Specifies the TFTP Server IP Address from which the image files 
are downloaded. 

Source File Name 

Specifies file name for the downloaded image file. Click Browse to 
locate the image file on your computer. 

 

The Active Image Page allows network managers to select and reset the Image files. 

Click Administration > Firmware Upgrade > Active Image. The Active Image Page opens. 

Figure 3-92 Active Image Page 

 

 

The Active Image Page contains the following fields: 

Table 3-71 Active Image Page item description 

Active Image After Reset 

Selects the image file to be active on the unit after the switch is 
reset. The possible field values are: 

z 

Current Image: Activates the current image after the switch is 
reset. 

z 

Backup Image: Activates backup image after the switch is 
reset. 

 

This section provides information for managing system logs. The system logs enable viewing switch 

events in real time, and recording the events for later usage. System Logs record and manage events 

and report errors and informational messages. Event messages have a unique format, as per the 

system Log protocols recommended message format for all error reporting. For example, system Log 

and local device reporting messages are assigned a severity code, and include a message mnemonic, 

which identifies the source application generating the message. It allows messages to be filtered based 

on their urgency or relevancy. Each message severity determines the set of event logging devices that 

are sent per each event message. 

The following table lists the log severity levels: