3com 3CBLSF26H Manual De Usuario
3-44
Item
Description
Source IP Address
Matches the source IP address to which packets are addressed to the ACL.
Source Mask
Indicates the source IP address mask.
Destination IP
Address
Address
Matches the destination IP address to which packets are addressed to the
ACL.
ACL.
Destination Mask
Indicates the destination IP address mask.
DSCP
Matches the packet DSCP value to the ACL. Either the DSCP value or the IP
Precedence value is used to match packets to ACLs.
Precedence value is used to match packets to ACLs.
IP Precedence
Indicates matching ip-precedence with the packet IP precedence value.
Action
Indicates the ACL forwarding action. In addition, the port can be shut down, a
trap can be sent to the network administrator, or packet is assigned rate
limiting restrictions for forwarding.
trap can be sent to the network administrator, or packet is assigned rate
limiting restrictions for forwarding.
Configuring ACL Binding
This section includes the following topics:
z
z
z
Defining ACL Binding
The ACL Binding Setup Page allows the network administrator to bind specific ports to MAC or IP based
ACLs.
Click Device > ACL > ACL Binding > Setup. The ACL Binding Setup Page opens.
Figure 3-46 ACL Binding Setup Page
The ACL Binding Setup Page contains the following fields:
Table 3-35 ACL Binding Setup Page item description
Item
Description
Bind ACL
Assigns ACL type
Select ACL
Selects the ACL from a list of previously defined ACLs to which the port can
be bound.
be bound.