3com 3CBLSF26H Manual De Usuario

 

3-48 

Figure 3-51 Queue Setup Page 

 

 

The Queue Setup Page contains the following fields: 

Table 3-40 Queue Setup Page item description 

HQ-WRR 

This highest queue is transmitted first if any packets are in the highest 
queue. When the highest queue is exhausted, the remaining queues are 
served by WRR. 

WRR(ratio 
1:2:10:15) 

This queue algorithm specifies which port queue that each packet should be 
sent to. The actual bandwidth of each port queue is determined by the 
weight, whose values are 1,2,10 and 15. 

 

The CoS to Queue Setup Page contains fields for mapping CoS values to traffic queues. Four traffic 

priority queues are supported on the switch, with 1 representing the lowest queue and four as the 

highest. The highest priority queue functions with strict priority while queues 1-3 function with WRR 

priority with the following weights (1, 2, 10 and 15) respectively. 

Click Device > QoS > CoS to Queue > Setup. The CoS to Queue Setup Page opens. 

Figure 3-52 CoS to Queue Setup Page 

 

 

The CoS to Queue Setup Page contains the following fields: