3com 3CBLSF26H Manual De Usuario

Descargar
Página de 135
 
3-53 
Figure 3-58 Bandwidth Summary Page 
 
 
The Bandwidth Summary Page contains the following fields: 
Table 3-47 Bandwidth Summary Page item description 
Item 
Description 
Status 
Indicates the ingress rate limiting status on the interface. The possible field 
values are: 
Enabled: Ingress rate limiting is enabled on the interface. 
Disabled: Ingress rate limiting is disabled on the interface. This is the 
default. 
Ingress 
Rate 
Limit 
Rate Limit 
Indicates the ingress traffic limit for the port. 
Status 
Indicates the egress traffic shaping status for the interface. The possible 
field values are: 
Enabled: Egress traffic shaping is enabled for the interface. 
Disabled: Egress traffic shaping is disabled for the interface. This is the 
default. 
CIR 
Indicates the Committed Information Rate (CIR) for the interface. 
Egress 
Shaping 
Rates 
CbS 
Indicates the Committed Burst Size (CbS) for the interface. 
 
Configuring Voice VLAN 
Voice VLAN allows network administrators to enhance VoIP service by configuring ports to carry IP 
voice traffic from IP phones on a specific VLAN. VoIP traffic has a preconfigured OUI prefix in the source 
MAC address. Network Administrators can configure VLANs on which voice IP traffic is forwarded. 
Non-VoIP traffic is dropped from the Voice VLAN in auto Voice VLAN secure mode. Voice VLAN also 
provides QoS to VoIP, ensuring that the quality of voice does not deteriorate if the IP traffic is received 
unevenly. The system supports one Voice VLAN. 
 
The Baseline Switch 2250-SFP Plus does not support improving the priority of voice streams.