3com 3CBLSF26H Manual De Usuario
3-71
Item
Description
Sleep Period
Set the authentication sleep period.
5 minutes by default
Note:
Within the authentication sleep period, no users on this port are
allowed to try to pass authentication.
Within the authentication sleep period, no users on this port are
allowed to try to pass authentication.
Aging time
Set the aging time.
1 hour by default
Note:
If there is no traffic of authenticated users through a port within the
aging time, the port will be aged out and enters the Block state.
If there is no traffic of authenticated users through a port within the
aging time, the port will be aged out and enters the Block state.
Ldb
Enable/disable the LDB feature on a port.
Disabled by default
Configuring an Authentication Server
On this page, you can configure different authentication servers for different VLANs.
Select Security > LDB > Authentication IP. The Authentication Server Configuration Page Opens.
Figure 3-77 Authentication server configuration page
Click Add, select the VLAN interface, and specify the authentication server IP address and subnet
mask to establish an association between a VLAN and an authentication server, as shown in 0.
Figure 3-78 Configure an authentication server
Configuring a User Account
On this page, you can configure user accounts for local authentication.
Select Security > LDB > User Configuration. The User Account Configuration Page Opens.