3com 3CRWXR10095A Manual De Usuario

5 Click Reset To Default.

6 Click OK.

After you configure a radio profile, you can select the radio profile, and 
click Properties to display a configuration wizard that contains all the 
configurable parameters for the radio profile. A dialog with the following 
tabs is displayed:

„

Radio Profile

„

802.11 Attributes

„

Auto Tune

„

Service Profile Selection

„

Radio Selection

„

Voice Configuration

The Radio Profile tab lists settings for the following options:

„

Name—Radio profile name

„

Countermeasures Mode:

„

None—Radios do not use countermeasures. This is the default.

„

All—Radios use countermeasures against devices classified by MSS 
as rogues and against devices classified by MSS as interfering 
devices. 

A rogue is a device that is in the 3Com network but does not 
belong there. An interfering device is not part of the 3Com 
network but also is not a rogue. MSS classifies a device as an 
interfering device if no client connected to the device has been 
detected communicating with any network entity listed in the 
forwarding database (FDB) of any WX switch in the Mobility 
Domain. Although the interfering device is not connected to your 
network, the device might be causing RF interference with MAP 
radios.

„

Rogue—Radios use countermeasures against devices classified by 
MSS as rogues, but do not use countermeasures against devices 
classified by MSS as interfering devices.