3com WX3000 Manual De Usuario

 

1-8 

Enter system view 

— 

Enable sending traps for the 
specified type of event 

port-security trap 
{ addresslearned | intrusion | 
dot1xlogon | dot1xlogoff | 
dot1xlogfailure | ralmlogon | 
ralmlogoff | ralmlogfailure } 

Required 

By default, no trap is sent. 

 

After an 802.1x user or MAC-authenticated user passes Remote Authentication Dial-In User Service 

(RADIUS) authentication, the RADIUS server delivers the authorization information to the device. You 

can configure a port to ignore the authorization information from the RADIUS server. 

Follow these steps to configure a port to ignore the authorization information from the RADIUS server: 

Enter system view 

— 

Enter Ethernet port view 

interface interface-type 
interface-number 

— 

Ignore the authorization 
information from the RADIUS 
server 

Required 

By default, a port uses the 
authorization information from 
the RADIUS server. 

 

Security MAC addresses are special MAC addresses that never age out. One security MAC address 

can be added to only one port in the same VLAN so that you can bind a MAC address to one port in the 

same VLAN. 

Security MAC addresses can be learned by the auto-learn function of port security or manually 

configured.  

Before adding security MAC addresses to a port, you must configure the port security mode to 

autolearn. After this configuration, the port changes its way of learning MAC addresses as follows. 

z 

The port deletes original dynamic MAC addresses; 

z 

If the amount of security MAC addresses has not yet reach the maximum number, the port will 

learn new MAC addresses and turn them to security MAC addresses; 

z 

If the amount of security MAC addresses reaches the maximum number, the port will not be able to 

learn new MAC addresses and the port mode will be changed from autolearn to secure.