3com WX3000 Manual De Usuario

 

2-15 

Set the status of the primary 
RADIUS 
authentication/authorization 
server 

state primary authentication 
{ block | active } 

Set the status of the primary 
RADIUS accounting server 

state primary accounting 
{ block | active } 

Set the status of the secondary 
RADIUS 
authentication/authorization 
server 

state secondary 
authentication { block | 
active } 

Set the status of the secondary 
RADIUS accounting server 

state secondary accounting 
{ block | active } 

Optional 

By default, the primary RADIUS 
servers in the default RADIUS 
scheme "system" are in the 
active state, the secondary 
servers in the scheme are in 
the block state, and all 
RADIUS servers in all other 
RADIUS schemes are in the 
block state. 

 

Follow these steps to configure the attributes of data to be sent to RADIUS servers: 

Enter system view 

— 

Create a RADIUS scheme and 
enter its view 

radius scheme 
radius-scheme-name 

Required 

By default, a RADIUS scheme 
named "system" has already 
been created in the system. 

Set the format of the user 
names to be sent to RADIUS 
server 

user-name-format 
{ with-domain | 
without-domain } 

Optional 

By default, the user names sent 
from the device to RADIUS 
server carry ISP domain 
names. 

Set the units of data flows to 
RADIUS servers 

data-flow-format data { byte | 
giga-byte | kilo-byte | 
mega-byte } packet 
{ giga-packet | kilo-packet | 
mega- packet | one-packet } 

Optional 

By default, in a RADIUS 
scheme, the data unit and 
packet unit for outgoing 
RADIUS flows are byte and 
one-packet respectively. 

Set the MAC address format of 
the Calling-Station-Id (Type 31) 
field in RADIUS packets 

calling-station-id mode 
{ mode1 | mode2 } 
{ lowercase | uppercase } 

Optional 

By default, the MAC address 
format is XXXX-XXXX-XXXX, 
in lowercase. 

RADIUS scheme view 

nas-ip ip-address 

Set the source IP address of 
outgoing RADIUS messages 

System view 

radius nas-ip ip-address 

Optional 

By default, no source IP 
address is set; and the IP 
address of the corresponding 
outbound interface is used as 
the source IP address.