3com 3CRWX120695A WXR100 Manual De Usuario

1 Access the Create USM User wizard:

a Select the Configuration tool bar option.

b In the Organizer panel, click the plus sign next to the WX switch. 

c Click the plus sign next to System.

d Select Management Services.

e In the Task List panel, select USM User.

2 In the Username box, type the name of the SNMPv3 user. The name can 

be 1 to 32 alphanumeric characters, with no spaces or tabs.

3 Select the access type. 

„

read-only—An SNMP management application using the string can 
get (read) object values on the switch but cannot set (write) them. This 
is the default. 

„

read-notify—An SNMP management application using the string can 
get object values on the switch but cannot set them. The switch can 
use the string to send notifications. 

„

notify-only—The switch can use the string to send notifications.

„

read-write—An SNMP management application using the string can 
get and set object values on the switch.

„

notify-read-write—An SNMP management application using the 
string can get and set object values on the switch. The switch can use 
the string to send notifications.

4 Specify the Engine ID, which is the unique identifier for this instance of 

the SNMP engine:

a Select the format:

„

Hex—ID is a hexadecimal string. 

„

IP—ID is based on the IP address of the station running the 
management application. Enter the IP address of the station. MSS 
calculates the engine ID based on the address. 

„

LocalID—Uses the value computed from the switch’s system IP 
address. 

To send informs, you must specify the engine ID of the inform 
receiver. To send traps and to allow get and set operations and so on, 
specify local as the engine ID.