3com 3CRWX120695A WXR100 Manual De Usuario

To open a network plan:

1 Establish a connection to the 3WXM Services host on which the network 

plan is saved. 

You can do this by restarting 3WXM or selecting File > Open, and then 
entering the IP address of the 3WXM Services host in the 3WXM Services 
Connection dialog box.

2 After the connection is established with the 3WXM Services host, select 

File > Switch Network Plan. 

If any changes were made to the currently loaded network plan, you are 
prompted to save them and close the file. The Switch Network Plan 
dialog box appears.

3 Select the network plan you want to open and click Next.

3WXM establishes a new connection to the host running 3WXM Services 
and loads the specified network plan.

You can import objects from another network plan into the currently 
open plan. When you import objects from another plan, objects are 
added to the currently open plan as follows:

„

If an object (object name) exists in the plan you are importing but not 
in the open plan, the object is added to the open plan.

„

If an object (object name) exists in both plans, the copy of the object 
in the imported plan replaces the object in the open plan.

If both plans have the same floor name, the floor in the plan you 
are importing completely replaces the floor of the same name in 
the other plan.

To import a plan:

1 In the main 3WXM window, select File > Import Network Plan. 

2 Select the network plan you want to import, from the Select Plan 

drop-down list.