3com 4500 PWR 50-PORT Manual De Usuario

 Specifies the priority level of the port, ranging from 0 to 7. 

Use the 

 command to configure the priority of Ethernet port.

Use the 

 command to restore the default port priority. 

By default, the priority level of the port is 0. The Switch replaces the 802.1p 
priority carried by a packet with the port priority that is defined. 

Every port on the Switch supports eight packet egress queues. The Switch puts the 
packets into different egress queues according to their priorities. 

When transmitting a packet, the Switch replaces the packet’s 802.1p priority with 
the priority of the received port, according to which the packet will be put into the 
corresponding egress queue. 

Set the priority of Ethernet1/0/1 port to 7.

<4500>system-view

System View: return to User View with Ctrl+Z

[4500]interface Ethernet 1/0/1

[4500-Ethernet1/0/1]priority 7

[4500-Ethernet1/0/1]

Ethernet Port View

None

Use the 

 command to configure the system to trust the packet’s 

802.1p priority and not replace the 802.1p priorities carried by the packets with 
the port priority. Use 

 command to configure the system not to 

trust the packet 802.1p priority. 

By default, the system replaces the 802.1p priority carried by a packet with the 
port priority.

For the related command, see 

.

Configure the system to trust the packet 802.1p priority and not replace the 
802.1p priorities carried by the packets with the port priority.

<4500>system-view