3com 4500 PWR 50-PORT Manual De Usuario

C

HAPTER

 12: U

SING

 S

YSTEM

 M

ANAGEMENT

 C

OMMANDS

undo mac-address [ { static | dynamic | blackhole } mac-address 

interface { interface-name | interface-type interface-num ] vlan 

vlan-id ]

System view

 Static table entry, lost after resetting switch.

 Dynamic table entry, which will be aged.

: Blackhole table entry, the packet with this destination MAC address 

will be discarded.

 Specify the MAC address. 

 Specify the interface type.

 Specify the interface number.

 Specify the interface name.

 Specify the VLAN ID.

Use the

 command to add/modify the MAC address table entry. Use 

the 

 command to delete MAC address table entry

If the input address has been existing in the address table, the original entry will be 
modified. That is, replace the interface pointed by this address with the new 
interface and the entry attribute with the new attribute (dynamic entry and static 
entry).

All the (MAC unicast) addresses on a certain interface can be deleted. User can 
choose to delete any of the following addresses: address learned by system 
automatically, dynamic address configured by user, static address configured by 
user.

For the related commands, see 

.

Configure the port number corresponding to the MAC address 00e0-fc01-0101 as 
Ethernet1/0/1 in the address table, and sets this entry as static entry.

<SW4500>sys

System View: return to User View with Ctrl+Z.

[SW4500]mac-address static 00e0-fc01-0101 interface Ethernet 1/0/1