3com 4500 26-PORT Manual De Usuario
362
C
HAPTER
12: U
SING
S
YSTEM
M
ANAGEMENT
C
OMMANDS
For the related commands, see
info-center enable
,
info-center loghost
,
info-center logbuffer
,
info-center console channel
,
info-center
monitor channel
.
Example
Show the system log information.
<SW4500>display info-center
Information Center: enabled
Log host:
173.168.1.10, channel number:2, channel name:loghost,
language:english , host facility local:7
Console:
channel number:0, channel name:console
Monitor:
channel number:1, channel name:monitor
SNMP Agent:
channel number:5, channel name:snmpagent
Log buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:6, channel number:4, channel name:logbuffer
dropped messages:0, overwrote messages:0
Trap buffer:
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel
name:trapbuffer
dropped messages:0, overwrote messages:0
Information timestamp setting:
log - date, trap - date, debug - boot
XRN SWITCH OF this Device: LOG = disable; TRAP = disable; DEBUG =
enable
info-center channel
name
Syntax
info-center channel channel-number
name channel-name
undo info-center channel
channel-number
View
System view
Parameter
channel-number:
Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name:
Specify the channel name with a character string not exceeding
30 characters, excluding "-", "/" or "\".
Description
Use the
info-center channel name
command to rename a channel specified by
the
channel-number
as
channel-name.
. Using the u
ndo info-center channel
command
, you can restore the channel name.
Note that the channel name cannot be duplicated.