3com 4500 26-PORT Manual De Usuario

System view

: Maximum number of the NTP sessions that can be established locally. This 

argument ranges from 0 to 100.

Use the 

 command to set the maximum 

number of NTP sessions that can be established locally.

Use the 

 command to restore the 

default.

By default, up to 100 dynamic NTP sessions can be established locally. 

Set the maximum number of dynamic NTP sessions that can be established locally 
to 50.

<SW4500> system-view

System View: return to User View with Ctrl+Z. 

[SW4500] ntp-service max-dynamic-sessions 50

ip-address ]

ip-address ]

VLAN interface view 

: Multicast IP address, in the range of 224.0.1.0 to 224.0.1.255. The 

default IP address is 224.0.1.1.

Use the 

 command to configure an Ethernet 

switch to operate in the NTP multicast client mode and receive NTP multicast 
messages through the current interface.

Use the 

 command to remove the 

configuration.

By default, no Ethernet switch operates in the NTP multicast client mode.