3com 5104M-FIB Manual De Usuario
SET MODULE ARP_RESOLVE_ METHOD
2-131
SET MODULE
ARP_RESOLVE_
METHOD
ARP_RESOLVE_
METHOD
Use the SET MODULE ARP_RESOLVE_METHOD command to specify whether
routing information is included in Address Resolution Protocol (ARP) requests
sent by the Token Ring Network Monitor Card (TR-NMC).
routing information is included in Address Resolution Protocol (ARP) requests
sent by the Token Ring Network Monitor Card (TR-NMC).
Format
Example
The following command includes routing information in ARP requests sent from
the TR-NMC in slot 3.2:
the TR-NMC in slot 3.2:
CB5000> set module 3.2 arp_resolve_method source_route
ARP resolve method set to source_route.
Related Command
SHOW MODULE
set module
slot.2
arp_resolve_method
source_route
non_source_route
slot.2
Selects the TR-NMC for which you want to enable or disable
routing information in ARP requests. Valid values are hub slot 1
through 17, subslot 2.
routing information in ARP requests. Valid values are hub slot 1
through 17, subslot 2.
non_source_route
TR-NMC does not include the routing information (RI) field in ARP
requests.
requests.
source_route
TR-NMC includes the routing information (RI) field in ARP requests.
This is the factory-default setting.
This is the factory-default setting.